ET2S AC or DC
Explosion Proof Injector Units .
These Units Rate is Proportional to the Flow of the Main Line. This Ensures Proper Mixing of the Additive. No Calculations are Needed, These Units Maintains a Perfect Ratio. |
Model ET2S12VT
Pressure to 120PSI
|
Model ET2S12VS
Pressure to 1500PSI
|
Model 1001
Pressure to 1500PSI
|
Model 3000
Pressure to 300PSI
|
1000 Series Batch Injector
Units Provide One Touch Operation with Metering
Pumps, Complete Packages Ready to use. |
3000 Series Batch Injector Units Provide
One Touch Operation with Meters. Complete Packages Ready to use. |
Custom or
Standard Built to Meet Your Flow Needs |
Complete Packages Ready For Drop and Go
|
There is no more pouring or guess work in
Blending Fuel Additives with this all electric Computerized Control System. The Econotrol TM Computer works with the Bulk Flowmeter that is already installed. By installing a pulser on the Flowmeter, the Econotrol measures the Bulk Delivery, and 100% of the additive ratio is blended automatically. The Computer Screen displays Bulk and Additive Flow Rates and Totals. When the Bulk Flow Rate slows down, so does the additive. |
ET2SP
12 Volt Explosion Proof Injector Units .
These Units Rate is Proportional to the Flow of the Main Line. This Ensures Proper Mixing of the Additive. No Calculations are Needed, These Units Maintains a Perfect Ratio. |
120V or 220V single piston injector pump
complete for injecting chemicals into flow streams or batching. Relief valve and red alarm LED are standard. Up to 120 ounces per minute. |
Model 1005
Pressure to 1500PSI
|
Model 1006
Pressure to 3000PSI
|
Model 3006
Pressure to 350PSI
|
120V Dual piston injector pump complete for
injecting chemicals into flow streams or batching. Relief valve, red alarm LED, Lo Flow alarm, inventory, flow rate, total, date, time and controlled access menus for parameters are standard. |
120V or 220V gear pump and meter complete for
injecting viscus chemicals into flow streams or batching. Relief valve, red alarm LED, Lo Flow alarm, inventory, flow rate, total, date, time and controlled access menus for parameters are standard. |
Injects the hard to inject viscous chemicals
|
Flow rates from 1-30 gpm with standard
enclosure.
Skid packages available with specified high flow
ranges. |